Xeed - Dosing Pumps
XE Series Specifications
XEED Electromagnetic Dosing Pumps (XE Series)
XEED pumps are compact, sturdy electromagnetic dosing pumps covering 2–12 Lph, operating on 230V, 50Hz, 1-phase AC. Standard accessories include injection check valve, foot valve, and 3m LDPE tubing. Tank mountable.
Key Advantages
- Energy efficient with unique diaphragm design for accurate dosing
- Speed control with Manual and Automatic (4-20mA) modes
- Built-in splash guard, fuse, and varistor protection
Specifications
- Type: Reciprocating diaphragm | Strokes: 100/min
- Accuracy: ±1% | Linearity: ±3% | Repeatability: ±3%
- Suction lift: 1.5m | End connection: ½” NPT-M
- Dimensions: 305 x 260 x 235mm
Materials
- Body/Faceplate: 30% Glass-filled PP | Chamber: SS316/PVC/PP
- Diaphragm: Teflon | Ball: Ceramic | Tubing: LDPE (OD 9.5mm x ID 6.35mm)
Power: 230V, 1-phase, 50Hz ACLorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
XH Series Specifications
XEED Hydraulic Diaphragm Pumps (XH Series)
XEED XH Series are motor-driven, hydraulically actuated diaphragm pumps complying with API 675 standard. The diaphragm is actuated by pressurized hydraulic oil, with the drive fully submerged in an oil bath for minimal wear. Flow rate is adjustable from 10–100% of rated capacity via stroke adjustment knob. Automation via 4-20mA through VFD is optional.
Key Advantages
- Teflon-Nitrile composite diaphragm for longer service life
- Robust Cast Iron (IS210-FG260) construction, compact size
- Oil-submerged lubrication for minimal wear and tear
- Hydraulic system with adjustable internal relief valve
- Optimum motor sizing for energy efficiency
- Drive and pump integrated with Love-Joy coupling
- Twin Bearing Support (TBS) for precise, consistent operation
- Optional 3D Technology — double diaphragm with pressure gauge/switch for diaphragm damage detection and auto pump shutoff
Specifications
- Type: Hydraulically actuated diaphragm | Flow control: Stroke
- Mode: Manual / Automatic (4-20mA via VFD)
- Accuracy: ±1% | Linearity: ±3% | Repeatability: ±3%
- Turndown ratio: 10:1
- End connections: Injection check 1½” NPT-M (Plastic), 1″ NPT (Metallic) | Y-Strainer: 1½” NPT-F
Materials
- Body/Hydraulic chamber: IS210 FG260 Cast Iron | Base: MS Fabricated
- Pump chamber: SS316/PP | Checks: SS316/PVC/Glass
- Diaphragm: Teflon-faced Nitrile | Y-Strainer: SS316/PP
Drive: TEFC Induction Motor — Class F Insulation
Power: 415V, 3-phase, 50Hz, 1400 RPM AC
XM Series Specifications
